HTS8 Wireless

General Features

  • Type: Wireless
  • IP grade: IP65
  • Drive motors: 1-n motors
HTS8 Wireless

TS8 wired controls can be used for simultaneously or separately operations. But it can not achieve 100% synchronization.

Features

  1. 2.4GHz Two-Button Wireless Remote Control: Frequency Hopping Technology for Interference-Free Operation
  2. Material: ABS, Environmentally Friendly, Flame Retardant, and Corrosion Resistant
  3. Remote Control Distance: 30M (Unobstructed), 20M (Standard)
  4. Control Mode: Selectable Latch(one-button lifting) and Non-Latch(press button to lift)
  5. Operating Current: 6mA, Standby Current: 1uA, Low Power Consumption, One Year Standby Time.
  6. Matching with GEMING control box HTK- series. Can be used for 1-N or N-1, No Interference Between Multiple Devices in the Same Scene.

HTS8 Wireless

How to change the control mode?

Firstly, please connect the control box and actuator correctly. Plug the control box into the power supply and insert the batteries into the remote control.

1. Clear code: Power off for 5 seconds, then power on. Press and hold the middle button for 10 seconds, release the button, and then power off again.

2. Set latch mode (one-button lifting): Power on and press the up button for 5 seconds.

3. Set non-latch model (press button to lift, release to stop): Power on and press the down button for 5 seconds.

 

How to connect 1 control to multiple control boxes?

Please refer to the video in the left column.

 

View

  • PDF

Time-Proven Application

Installed in a woodworking saw table in 2017,
this linear actuator remained in continuous service for years without replacement.

In 2025, the same customer reordered the identical model for a new project.

See Time-Proven Application