Equipment requiring an enclosed screw axis and application-specific contamination review. Contact GEMING with your payload, stroke and speed requirements for configuration review.
GM-LM-CS120 Enclosed Ball Screw Linear Slide is a selection option for enclosed precision positioning. Equipment requiring an enclosed screw axis and application-specific contamination review.
Equipment requiring an enclosed screw axis and application-specific contamination review. Select this structure by the required travel, payload, installation orientation and available space.
| Selection reference | GM-LM-CS120 |
|---|---|
| Drive structure | Enclosed Ball Screw Linear Slide |
| Body width | 120 mm |
| Catalog stroke envelope | Up to 1050 mm; configuration review required |
| Catalog maximum handling-weight envelope | Up to 50 kg; mounting and drive configuration dependent |
These values describe the catalog selection envelope, not a guaranteed combined operating point. Payload, speed, stroke, screw lead or belt configuration, motor and mounting must be reviewed together. Handling weight in kg is not rated axial thrust.
Provide the moving mass, center-of-gravity offset, horizontal or vertical mounting, travel, target speed, acceleration, cycle rate and operating environment. Motor, drive, feedback, brake and sensors must be confirmed for the selected configuration.
Enclosure alone does not establish a cleanroom class, IP rating or washdown suitability. These require configuration-specific evidence.
Send your application and motion requirements to GEMING for configuration review. The selection reference identifies this website option; the final ordering specification is confirmed in the quotation.
Compare linear slides and choose a drive structure.
Retouched appearance illustration. Final dimensions, mounting details and motor configuration are confirmed in the approved project drawing.
Installed in a woodworking saw table in 2017,
this linear actuator remained in continuous service for years without replacement.
In 2025, the same customer reordered the identical model for a new project.
