The 26th Shanghai International RV Show took place from May 22 to May 24, 2026. The venue was the National Exhibition and Convention Center in Shanghai. These dates and the venue are listed by the Shanghai exhibition information platform.
Why the event matters for motion engineering
An RV combines living space, vehicle structure, electrical power, and outdoor use. Motion parts must fit in limited space. They must also work with vibration, moisture, dust, and changing loads.
The show brought RV brands, parts suppliers, and outdoor equipment firms into one venue. It gave the industry a place to compare practical designs. It also highlighted the need for compact and easy-to-control motion systems.
Where electric motion can be used in an RV
- Adjustable beds, tables, and seats
- Roof, hatch, step, and storage movement
- Equipment trays and service platforms
- Solar panels, antennas, and sensor mounts
- Utility vehicle and mobile workshop equipment
A linear actuator can create push-pull motion. A lifting column can provide guided vertical travel. The machine structure must guide any side load that the selected actuator cannot carry.
Key selection data
- Load: static load, dynamic load, and load direction
- Travel: stroke, closed length, and available space
- Motion: speed, stops per cycle, and duty cycle
- Power: voltage, peak current, and control method
- Environment: water, dust, salt, temperature, and vibration
- Safety: load holding, pinch points, limits, and manual release
Product parameter selection example
Assume a storage platform carries 80 kg and needs 400 mm of travel. The first step is to define the mounting angle. Next, calculate the force at the least favorable position. Then add friction and the approved safety factor.
After the force check, review closed length, speed, duty cycle, voltage, and load holding. Also check water exposure and vehicle vibration. The final actuator must be tested in the complete mechanism.
This example explains the process. It does not select a product model. Use the electric lifting column guide when the load needs a guided vertical column.
Engineering takeaway
RV motion design is not only about rated force. Space, power, weather, vibration, noise, and safe load holding all matter. Clear input data leads to a better technical review.
GEMING supplies electric linear actuators, lifting columns, and controls for industrial and mobile equipment. A final recommendation requires the real layout and work cycle.
Frequently asked questions
The event ran from May 22 to May 24, 2026, according to the Shanghai exhibition information platform.
The listed venue was the National Exhibition and Convention Center in Shanghai.
Possible uses include adjustable beds, steps, roof systems, hatches, storage, tables, and equipment platforms. Each use needs its own load and safety review.
Provide the load, stroke, speed, mounting layout, duty cycle, voltage, environment, expected vibration, and behavior during power loss.